RAE Systems ToxiRAE 3 CO Gas Detector G01-0101-000

Available - Usually ships in 4 - 6 weeks
80% of 100

The ToxiRAE 3 from RAE Systems is a single-gas monitor designed to be the most reliable on the market. Unlike competitors, the ToxiRAE 3 provides an ongoing digital readout of toxicity levels.

While single-gas monitors for carbon monoxide (CO) are being produced by a number of companies, reliability in these portable devices has been known to be an issue. To successfully counter this issue RAE systems is taking significant steps in the design of their monitors to deal with the on-the-job realities of their use.

For bump test and calibration, use cylinders that contain 50ppm CO.

Key Features:

  • High-performance miniature sensors are soldered to insure strong electronic connections that combat unit failure from vibration

  • The steel case is tougher than plastic and defeats electromagnetic interference

  • IP-67 water-proof and dust resistance levels mean serious toughness

  • A quick 12-second bump test

  • The replaceable battery; to make sure you get full sensor life, no matter how many times the unit goes into alarm!

These design features, and RAE Systems' continued pledge to excellence and reliability offer unequaled cost of ownership value.

ToxiRAE 3 is compatible with the AutoRAE Lite bump and calibration station. This station delivers very fast (12 second) bump checks and automated record keeping. The ToxiRAE 3 is a total package thoughtfully designed to keep instruments in the field where they belong; keeping your workers safe and productive.

Each single monitor includes an operating manual, a rugged alligator clip, a gas-test adapter and a certificate of calibration.

Hazardous Environment Certification:

  • US and Canada: C1D1, Groups A, B, C, D, T4

  • Europe: ATEX II 1G EEx ia IIC T4

  • IECEX: Ex ia IIC T4

Weight: 3.5 oz (99 gr) with battery

Part Number:

More Information
Price $220.00
SKU RAE01-G01-0101-000
Weight 3.0000
Brand RAE Systems
MPN G01-0101-000
Type Single-Gas
Gas Type Carbon Monoxide (CO)
5th Sensor No
Color No
Write Your Own Review
You're reviewing:RAE Systems ToxiRAE 3 CO Gas Detector G01-0101-000
Your Rating

6 Item(s)

Show per page
  1. Kevin Rowley

    2014-04-16 17:41:02

    Are there preset alarm levels? If so what are they?

    1 answer
    1. Justin

      2014-04-16 17:41:02

      Yes there are preset alarms. The low alarm is set for 35 ppm, the high alarm is set for 200 ppm.

  2. RJ

    2014-09-03 22:43:23

    How do you change the battery in this meter (ToxiRAE 3)?

    1 answer
    1. Chris

      2014-09-03 22:43:23

      For changing the battery on the RAE Systems ToxiRAE 3, you need to remove the 5 #1 philips screws on the back (black side) of the instrument. I suggest removing them completely, and carefully setting them to the side. You do not need to remove the screw holding on the alligator belt clip, as this is attached to the back only, and does not go through. Once the screws have been removed, hold the instrument upright. With the belt clip in your right hand, use your left index finger to tug at the slot on top of the silver side of the instrument. It should separate easily.
      The battery is a RAE Systems part number 500-0076-100
      Once the battery has been replaced, place the back on the instrument. You may have to work it around a bit to make sure that it is seated properly before attempting to put in the screws. This will insure that the seals are engaged, and resistance to dust and liquids matches factory specs. A slightly cock-eyed plate can still be tightened down, but not fully seal. Tighten screws until snug. No need to over tighten.

  3. Joe

    2014-12-03 20:20:10

    The unit comes with a plastic device that will snap into the right side "sensor". Is this plastic device suppose to be snapped on during normal operations? Or is it used to test the device? Also, is there anything I need to do to calibrate the unit?

    1 answer
    1. Chris

      2014-12-03 20:20:10

      The ToxiRAE 3 from RAE Systems comes with a black plastic calibration adapter. This allows for a metered amount of cal gas to be flowed across the sensor when either calibrating or bump testing the instrument. This cap should not be used during normal operation.
      The gas detector comes calibrated and fully ready for use right out of the box. A card with calibration information (date, etc) comes with each instrument. For maximum accuracy, the unit may be calibrated. In general, we recommend once every 6 months. This may be done more often if you like, depending on your requirements. A cylinder of calibration gas and a regulator are required to do this, and it can easily be done by the user. Might cost about $250 to purchase these parts, or we can calibrate for you, approx $75 including return shipping.

  4. Ryan

    2015-04-15 21:47:04

    Can someone advise the specific calibration kit/equipment required as well as the number of units that a tank and regulator calibration kit will likely re-calibrate?
    We are an EMS Department looking to outfit all of our first in bags. Is calibration a requirement every 6 months. Could you provide the instructions for re-calibration?

    1 answer
    1. Chris

      2015-04-15 21:47:04

      The RAE Systems ToxiRAE 3 gas detectors should be calibrated every 6 months (180 days) at a minimum. We have 3 ways to accomplish this. First, we can use a 34 liter cylinder of test gas and a 0.5 Liter Per Minute (LPM) regulator. This will do about 50 calibrations, over 120 bump tests, or some combination of the two.
      Second alternative is the AutoRAE Lite calibration station. This is a dedicated dock that very quickly and efficiently can bump test or calibrate your instruments. A 34-liter cylinder of Calibration Gas can provide about 800 bump tests, about 180 calibrations or some combination of the two. The AutoRAE Lite is most effective when you have 10 or more detectors to maintain. <br><br>
      Lastly, we are happy to calibrate your ToxiRAE 3 gas detectors. Factory trained and certified technicians will turn around your instrument in 1 day or less.

  5. Chris

    2016-07-13 18:05:04

    Hi does the TOXIRAE 3 have a built in data logger, and if so what is the storage capacity and the averaging time for each stored data point?

    1 answer
    1. Alan

      2016-07-13 18:05:04

      It will log 10 events and will only log when the monitor is triggered, but not how long the monitor has been exposed.

  6. Humberto

    2016-12-19 19:03:21

    Wondering how often the unit needs to be bumped if it is put on EMS equipment for first responders to carry on calls on a daily basis. Also approximately how long would the battery be expected to last.
    Thank you

    1 answer
    1. Alan

      2016-12-19 19:03:21

      <p>A bump test is recommended every time you bring the monitor out to the field. However, it is only a recommendation.</p>
      <p>A calibration will be needed every 6 months, and that is required in order for the monitor to read out properly.  We provided the calibration for $99.</p>
      <p>The monitor can be turned on and off, so depending on how you use it, the monitor can last somewhere from 1-2 years on the life of the battery.  The battery can also be replaced.</p>
      <p> </p>
      <p> </p>

Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.