RAE Systems Water Trap External Filter 10/Pack 008-3022-010

Available - Usually ships in 4 - 6 weeks
60% of 100
The water trap filter is made of PTFE Teflon membrane with a 0.2 micron pore size to prevent water from being sucked into the sensor manifold, which would cause extensive damage to the monitor. It will also prevent dust and other particles from entering the monitor, thereby prolonging the operating life of the sensors.

To install the water trap filter, twist it tightly into the Luer connector on the inlet probe.

If the water trap filter changes color, traps dust or other particulates inside it, or if water has been sucked in, the filter needs to be replaced.

The water filter should not be used for some of the gases that could be absorbed by the filter material. These gases include: CL2, PH3, NH3, and HCN.

Packed and sold in a bag of 10.

Part Number:
More Information
Price $34.00
SKU RAE01-008-3022-010
Weight 2.0000
Brand RAE Systems
Accessory No
BW Parts No
Gas Type No
BW Sensors No
MPN 008-3022-010
Color No
Write Your Own Review
You're reviewing:RAE Systems Water Trap External Filter 10/Pack 008-3022-010
Your Rating
Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.