Gas Clip Multi-Gas CS Monitor with Internal Pump MGC-IR-PUMP

Out of stock - Contact us for availability
Regular Price $1,095.00 Sale Price $949.00 You Save $146.00
The Gas Clip MGC Pump is ideal for confined space entry. This multi-gas IR monitor tests for the OSHA-required H2S, CO, LEL, and O2 concentrations and features an internal sampling pump which can pull air to the sensors from up to 75 feet away. The IR LEL (combustible gas) sensor uses very little energy and allows the unit to work a full week of detection on a single charge. The MGC-IR-PUMP uses low-power photometric (IR) technology to detect combustible gases (LEL). The power-sipping IR sensor allows the monitor to have incredibly long battery life. Another advantage of the Gas Clip IR sensor is that it's immune to silicon or H2S poisoning from over-saturation.

Key Features:
  • Measures H2S, CO, LEL, and O2
  • 5 day operation on a single charge
  • One button interface
  • 6 month calibration cycle
  • Sample pump draws from up to 75 feet
  • Low maintenance
  • Rugged design
  • Large LCD screen
  • Fully submersible
  • Size: 5.7 x 3.0 x 1.5 in. (147 x 78 x 38.3 mm.)
  • Weight: -4 degrees to +122 degrees F (-20 degrees to +50 degrees C)
  • Temperature: 5 Percent to 100 Percent RH (non-condensing)
  • Battery Life: 5 days continuous
  • Charging Time: 4-6 Hours
  • Alarms: Visual, Vibrating, Audible (minimum 95 dB) Low, High, STEL, TWA and OL (Over Limit), Pump
  • LEDs:4 red alarm bar LEDs Yellow backlit (activated on button press) Red backlit (activated on alarm condition) Yellow Maintenance Notification LED
  • Display: Alphanumeric Liquid Crystal Display (LCD)
  • Logs: 25 Bump test 25 Events 25 Calibrations Continuous 1 second data logging (> 2 month typical capacity)
  • Tests: Full function self-test upon activation Sensors, battery and circuitry conditions
  • Gas Inlet: 1/8th in. connector
  • Warranty: 2 full years
Remember to calibrate every six months and regularly perform bump tests.

Part Number:
More Information
Price $1,095.00
Product Weight (lbs.) 1
Weight 1.5000
Brand Gas Clip Technologies
Type Multi-Gas
Gas Type %LEL, O2, H2S, CO
5th Sensor N/A
Color N/A
Write Your Own Review
You're reviewing:Gas Clip Multi-Gas CS Monitor with Internal Pump MGC-IR-PUMP
Your Rating

2 Item(s)

Show per page
  1. Mandy

    2015-02-03 00:25:36

    Does this need a tube to be bought separately and will this monitor fit in the calibration station for the other gas clip monitors without the pump?

    1 answer
    1. Chris

      2015-02-03 00:25:36

      The Gas Clip MGC-PUMP gas detector comes with an internal sample draw pump. Air sampling may be extended with 1/8 inch diameter Tygon tubing. Additionally, an accessory sampling probe is available. The probe has an extendable wand, and makes for convenient gathering of remote samples. The MGC-PUMP gas detectors are a different shape and configuration than the diffusion instruments, and will not fit in the standard dock.

  2. Howard

    2016-01-06 16:24:24

    how do I recalibrate this machine?

    1 answer
    1. Ben

      2016-01-06 16:24:24

      You will need a cylinder of calibration gas and a regulator. One of our experienced service technicians will be happy to guide you through the process over the phone, please just give us a call.

Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.