Gas Clip Technologies Multi Gas Clip w/Pellistor Sensor MGC-P

Available - Usually ships in 6 - 8 weeks
100% of 100
Regular Price $595.00 Sale Price $515.70 You Save $79.30
The Gas Clip Technologies 4-gas monitor with internal pump is an affordable and durable confined space entry monitor that tests for the standard, OSHA-required four gases are tested with this monitor (CO, O2, LEL and H2S). The sample pump is capable of pulling samples from up to 75 ft. away while the rechargeable battery gives 30 hours of continuous run time on a single charge.

Key Features:
  • 30 hours run time on a single charge
  • 6 month calibration cycle
  • One button interface
  • Bump test/calibration reminders
  • Programmable user ID
Remember to calibrate every six months and regularly perform bump tests.

  • Size:4.7 in. H x 2.4 in. W x 1.2 in. D
    (118.6 mm H x 61.6 mm W x 31.7 mm D)
  • Temperature:
    -4 degrees F to 122 degrees F
    -20 degrees C to 50 degrees C
  • Humidity 5 percent to 95 percent RH (non-condensing)
  • Battery Life: 5 days on one charge
  • Alarms Visual, Vibrating, Audible (minimum 95dB)
    Low, High, STEL, TWA and OL (Over Limit)
  • Gases H2S: 0-100 PPM, CO: 0-500 PPM, Combustible: 0-100 percent LEL, O2: 0-30 percent
  • LEDs: 4 red alarm bar LEDs
    Yellow backlight (activated on button press)
    Red backlight (activated on alarm condition)
    Yellow Maintenance Notification LED
  • Tests: Full function self-test upon activation
    Sensors, battery and circuitry continuous
  • Ingress Protection: IP66/67
  • Certifications CSA: Class 1 Div 1 Groups A, B, C and D
    CAN/CSA C22.2 No. 157 and C22.2 No. 152
    ANS/UL 913 and ANSI, ISA-S12.13 Part 1
    ATEX: CE Sira 14ATEX2013 II 1 G, Ex ia IIC T4 Ga
    InMetro: IECEx:Ex: EXia IIC T4 GA
  • Warranty: 2 years
Part Number:
More Information
Price $595.00
Product Weight (lbs.) 1
Weight 1.5000
Brand Gas Clip Technologies
Type Multi-Gas
Gas Type %LEL, O2, H2S, CO
5th Sensor No
Color No
Write Your Own Review
You're reviewing:Gas Clip Technologies Multi Gas Clip w/Pellistor Sensor MGC-P
Your Rating

1 Item

Show per page
  1. Todd

    2016-08-23 14:55:26

    I'm currently working in Janesville Wisconsin, where can I get my 4 gas monitor calibrated

    1 answer
    1. Ben

      2016-08-23 14:55:26

      Our Service department is located in Alameda, California. Please give us a call and we'll be happy to send you the paperwork.

Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.