SAVE UP TO 40% OFF

BW Clip 2 Year CO Single Gas Detector, BWC2-M50200

Available
SKU
BW01-BWC2-M50200
Rating:
100% of 100
Regular Price $195.00 Sale Price $115.00 You Save $80.00
  • Buy 10 for $110.00 each and save 4%
  • Buy 80 for $105.00 each and save 9%

The BW Clip 2-Year Detector for CO is a maintenance free, single gas detector for carbon monoxide. This monitor has default alarm setpoints at 50 ppm to 200 ppm. As your every day companion for hazardous environments, the BW Clip has everything you need - plus new features to make your gas detection easier, safer, and more reliable. Just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime. With the two-year BW Clip for CO, you can use the BW Clip Hibernation Case when you're not using it for a week or more and extend it's life by that period of time, up to 12 months. Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant. Use the hands-free Hard Hat Clip carrying accessory GA-HC-1 with any of the BW single gas monitors. Custom calibrations are available direct from PK Safety. If you need custom alarms for your BW Clip, we have technicians that can customize these settings to your exact requirements without delaying your order. Volume discounts starting at 6 units. Call us at 1-800-829-9580 for details.


BW Clip Standard Features:



  • Maintenance-free: no sensor or battery changes necessary

  • Compact, lightweight design with one-button operation

  • Designed for a range of harsh environments and extreme temperatures

  • Hibernation mode with case accessory or IntelliDoX

  • Automated self-test of battery, sensor and electronics

  • Wide-angle flash, which alerts simultaneously with audible and vibrating alarm

  • Automatic logging of the 35 most recent gas events and bump test results

  • Compatible with MicroDock II and Fleet Manager II software

  • Ip 66/67- can be submerged up to 1 meter

  • Default Alarm Setpoints: Low 50 ppm, High 200 ppm

  • Alarm Setpoints Range from 5 ppm - 200 ppm

  • Detector measuring range from 0-300 ppm

  • Automated self test

  • Affordable, with low cost of ownership


Configurable Options with IntelliDoX Management System:



  • Configuration of high and low alarm set points before the device is activated

  • Adjustment of alarm set points and other parameters as needed throughout the lifespan

  • Non compliance chirp indicator

  • Configuration without activation

  • Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs

  • Option to display gas reading during alarm

  • User settable bump test reminder

  • 7-8 sec bump test with no more than 1 minute purge

  • Option to display the Real Time Clock


Use the unique advanced technology for safety compliance and productivity:



  • Unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

  • Reflex Technology advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence


IntelliDoX instrument management system is the quickest bump test in the industry with configuration of alarm set points. It can perform different tests for up to five BW Clip detectors at once for maximum productivity with easy and accurate record-keeping.


BW Clip Specifications:



  • Weight: 0.6 lbs.

  • Temperature: -40 to 122 Degrees F

  • Humidity: 5 - 95 percent RH (non-condensing)

  • Alarms: Visual, vibrating, and audible

  • Typical Battery Life: Two years


Part Number:


BWC2-M50200 2 Year CO 50-200

More Information
Price $195.00
SKU BW01-BWC2-M50200
Product Weight (lbs.) .30
Weight 0.8000
Brand BW Honeywell
MPN BWC2-M50200
Type Single-Gas
Gas Type Carbon Monoxide (CO)
5th Sensor No
Color No
Write Your Own Review
You're reviewing:BW Clip 2 Year CO Single Gas Detector, BWC2-M50200
Your Rating
Questions

1 Item

Show per page
  1. woody

    2015-05-06 20:47:03

    Does this monitor continuously display the current CO level, in ppm, from 0 on up, or only if the level exceeds preset limit?

    1 answer
    1. Chris

      2015-05-06 20:47:03

      The BW Clip BWC2-M50200 does not display readings at any time. This is a compliance detector, with alarm points to alert the user when preset limits are reached. These are OSHA default alarm settings. On the plus side, no calibration is required for the life of the unit.
      <br><br>
      If seeing the actual gas level values is important to you, we have other instruments. For instance, the BW GasAlert Extreme CO monitor will show a constant digital readout. You will need to calibrate the unit every 180 days at a minimum to maintain accuracy.

Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.